| Device | Platform | Device type | Template | Backup Status | Intended Status | Compliance Status |
|---|
Format Apply to when the condition matches. With a Check range, only blank Apply to cells are coloured.
Restrict what can be entered in the selected range (Sheets-style).
Use SheetName!A2:A100 for another tab, or click this field then select cells on the current sheet.
Enter the real-world length between your two points (the full plan width in map coordinates is 1 from left to right; you can pan and zoom before the second click).
Default +0%. Range −400% to +400% relative to the normal pin size.
Rotates the floor image only (for initial map setup). Objects stay where they are. Saved with this map.
Applied on top of Map edit object size (−400% to +400%). Use negative values when pins feel too large on the monitor wall.
Variables %DEVICE%, %MAP%, %STATUS%. %SITE% and %TIME%
Use $OID$ or a threshold description name like $Nexus Temp$ for live SNMP values, e.g. Temp:$1.3.6.1.4.1.9.9.13.1.3.1.3.1011$ or Temp:$Nexus Temp$
Only switches on maps with this enabled appear in Compliance Configuration Overview and Play-all.
What resolution do you require? Object icons will change size depending on the zoom level selected.
Lower % — zoomed out on the map, larger icons. 200% — strongest export zoom, smallest icons.
Choose how sharply to rasterize this PDF. Higher quality keeps text readable when zoomed in, but uses more memory.
On MGMT IPs, when Status (column F) is Requested, the list uses Device - stack position (column B) and shows Location (column C). Those rows appear at the top in green, then a divider, then rows from your main range.
Drag a row onto the map to place, or onto an existing same-type object to link it. Or use Place on next click then click the floor (or an existing object).
Choose where VLAN Patch, MGMT IPs, VLANs, Interfaces, and Data are read and written. Service → object mappings and status colours stay the same either way. Default is Google Sheet so you can switch back anytime.
When you place a wifi, wired, or switch object from the rail: Do not add to Plan leaves it map-only (default). Start from row creates or uses rows from that sheet row upward (default 2001). Next available line fills an existing blank row (never inserts).
Upload a service account JSON key once. Spreadsheet ID and service mappings are saved per site (switch site in the toolbar to configure another sheet).
Share each spreadsheet with the service account email. The main import always uses the VLAN Patch tab at 'VLAN Patch'!A:ZZ.
Plan mode reads and writes this site’s workbook tabs (VLAN Patch, MGMT IPs, VLANs, Interfaces, Data). Keep the Service → object mappings below. No Google spreadsheet ID or service account is required.
Requested switches on the MGMT IPs tab are read from B2:F501 (columns B–F, including Location in C) on that tab, using the same spreadsheet ID.
Status options are read from column A on the Data tab from row 2 onward (row 1 is the Status header and is ignored). Pick a pin colour for each status; assignments are saved per site.
Object description overrides the map default. Monitor mode only. Use $OID$ or a threshold description name like $Nexus Temp$ for live SNMP values.
Suppress alerts for the chosen period. Light blue only while down during ack.
Choose the switch and port for this link.
Link turns red as traffic approaches the threshold (50% = brown/red).
Only tick fields you want to change. Unticked fields are left as they are.
| Task | Every | Last run | Status |
|---|
%DEVICE% switch name · %IP% management IP · use // around passwords or keys to ignore values in compliance checks
Selected switch types will use the replacement lines instead of the base line.
No edit history for this cell yet.